Technical Data Small Chamber Type
| Laser Safety Class | class 1, internal and type „Open“ class 4 |
| Beam Source | Nd:YAG, flashlamp pumped, pulsed |
| Wavelength | 1064 nm |
| max. Pulse Energy | 70 Joule |
| max. Peak Power | 17 kW |
| max. Average Power | 60 W bzw. 120W |
| Duty Cycle | 100 % |
| Energy Adjustment Mode | Voltage or PWM Mode |
| Voltage | 160 – 500 V |
| Pulse Width | 0.1 – 20 ms |
| Pulse Frequency | Single pulse up to 20 Hz |
| Puls Fill | 10 – 100 % |
| PWM mode | 1 – 100 % |
| Focal Length | 120 mm |
| Beam Diameter | 200 μm – 2 mm, motorized beam-expander |
| Microscope | Leica binocular, oculars magnification 20x |
| Illumination of Workplace | Dual LED-Cold Light, switchable |
| Parameter Settings Memory | 50 settings, individual named |
| Energy Measurement System | integrated |
| Controller | Multi-controller-system, self diagnostic system, |
| plaintext for maintenance and status messages | |
| interface: RS232, CAN-Bus | |
| Welding Chamber: | closed, window with laser safety filter glass, |
| removable bottom plate, | |
| Dimensions inside: | max. B 270 x T 400 x H 230 mm³ |
| Doors: | zwei, sicherheitsüberwacht |
| Opening dimensions: | max. B 210 x H 170 mm² |
| Shielding gas supply | dual, on beam axis and selectable flexible nozzle, |
| adjustable gas delay | |
| Cooling-System | integrated, closed, Water/Air-Heat Exchanger |
| temperature controlled fan | |
| Electrical Supply | 230 V / 50 Hz 1,5 kW |
| bzw. bei 120 W-Version 400 V / 50 Hz 4 kW | |
| Dimensions and Weight | ca. B 620 x T 1140 x H 1060 mm³, ca. 80 kg |
Note: Technical information is partially dependent on the design and features of the device. We are continuously improving our products. We reserve the right to make changes to the same without prior announcement. Errors excepted.